How much drywall for a 16×16 room?

A 16×16 ft room with 8 ft walls needs 27 sheets of 4×8 drywall for the walls and ceiling, or 18 sheets for the walls only, including 10% waste.
16 ft16 ft8 ft
ItemAmountEst. cost
4×8 ft sheets (1/2 in)27 sheets$324–$486
Joint compound (4.5 gal bucket)2 buckets$34–$50
Paper tape (500 ft roll)1 roll$6–$10
Drywall screws5 lb$30–$50

64 ft perimeter × 8 ft = 512 sq ft of wall, plus 256 sq ft of ceiling = 768 sq ft. Plus 10% ÷ 32 sq ft per sheet = 27 sheets.

By sheet size

SheetWalls+ ceilingCost
4×8 ft1827$394–$596
4×10 ft1522$400–$616
4×12 ft1218$394–$614

Taller walls

WallsAreaSheetsCost
8 ft768 sq ft27$394–$596
9 ft832 sq ft29$435–$657
10 ft896 sq ft31$459–$693

Walls and ceiling, 4×8 sheets, 10% waste. Cost includes compound, tape and screws.

Your room is different?

Many pros skip deducting small openings and use offcuts instead.
Sheets to buy
27 sheets
768 sq ft to cover
Total $394–$596
16 ft16 ft8 ft
ItemAmountEst. cost
4×8 ft sheets (1/2 in)27 sheets$324–$486
Joint compound (4.5 gal bucket)2 buckets$34–$50
Paper tape (500 ft roll)1 roll$6–$10
Drywall screws5 lb$30–$50

Use 1/2 in board on walls, and 5/8 in on ceilings with framing 24 in apart or where code requires fire-rated board.

Frequently asked questions

How many sheets of drywall for a 16×16 room?

27 sheets of 4×8 drywall for the walls and ceiling of a 16×16 ft room with 8 ft walls, including 10% waste. The walls alone take 18 sheets.

How many 4×12 sheets for a 16×16 room?

18 sheets of 4×12 for walls and ceiling, or 12 for the walls only. Longer sheets mean fewer seams to tape, but they need two people to hang.

How many square feet of drywall is a 16×16 room?

The walls are 64 ft around × 8 ft = 512 sq ft, and the ceiling is 256 sq ft, for 768 sq ft in total. Most pros don't subtract doors and windows and use the offcuts instead.

How much does it cost to drywall a 16×16 room?

Materials run about $394–$596 with 4×8 sheets: board, 2 buckets of joint compound, 1 roll of tape and 5 lb of screws. Hiring a pro to hang and finish usually costs several times more.